Deze olie wil ik gebruiken.
Gewoon even een extra spoel cycle, Er is regelmatig olie vervangen dat wel, ik wilde het gewoon even staps gewijs doen. om niet de hele meuk los te weken.https://www.motorolie-centrale.nl/Motorolie/High-Performer/5W-40/p-OIL-66
stukje text van een sitehttps://www.oilspecifications.org/acea.php
There are ACEA specifications for passenges car motor oils (the A/B class) for catalyst compatible motor oils (the C class) and for heavy duty diesel engine oils (the E class). The classes are further devided into categories to meet the requirements of different engines. The A/B class's A5/B5 oils have lower HTHS viscosities, which means that they provide better fuel economy but they may not provide adequate protection in engines that are not designed for them. ACEA A3/B3 and A3/B4 on the other hand require oils with higher HTHS viscosities that may not provide as good fuel economy as an A5/B5 oil but may offer better engine protection in certain engine designs. The categories within the C class are devided along SAPS limits and along HTHS viscosities. C1 and C4 are low-SAPS oils, while C2 and C3 are mid-SAPS oils. On the other hand C1 and C2 oils have lower HTHS viscosities, while C3 and C4 oils have higher HTHS viscosities. The C5 category that has been newly introduced in the ACEA 2016 sequences has even lower limit for HTHS vicsosity. In order for an oil to meet this specification it must be a mid-SAPS oil and its HTHS viscosity has to be between 2.6 and 2.9 mPa*s. In case of the E class the SAPS content and the drain interval make the difference. E4 and E6 oils offer longer drain intervals where the engine manufacturer allows it while E7 and E9 are designed for medium drain applications. E6 and E9 have limited SAPS content so they can be used in engines that require this including Euro VI engines.
ACEA A3/B3 Stable, stay-in-grade Engine Oil intended for use in Passenger Car & Light Duty Van Gasoline & Diesel Engines and/or for extended drain intervals where specified by the engine manufacturer, and/or for year-round use of Low Viscosity Oils, and/or for severe operating conditions as defined by the Engine Manufacturer.
C staat voor katalysator.
ACEA C3 Stable, stay-in-grade Engine Oil with Mid SAPS-Level, intended for use as catalyst compatible Oil at extended Drain Intervals in Vehicles with all Types of modern Aftertreatment Systems and High Performance Passenger Car & Light Duty Van Gasoline & DI Diesel Engines that are designed to be capable of using Oils with a minimum HTHS Viscosity of 3.5 mPa*s.
lijkt mij als het light duty is niet mee te moeten blazen. het is alleen 5ltr erin stationair lopen en weer de plug los.
Zal wel mee vallen zit wil alleen geen clusterfuck
deze olie moet erin komen.
Castrol edge 5w40
En 3 liter bak olie volgens Autolussohttps://www.motorolie-centrale.nl/Transmissieolie/Fuchs/p-OIL-834